Better decisions, from the first minute of every shift

Your team starts each shift knowing what matters most, why it’s happening, and what to do next—guided by AI that understands your plant.

Start of shift

When the data looks alarming

Instead of scanning dozens of trends, Archimetis flags the few things that matter, explains why they’re abnormal, and suggests what to check first.

Fouling rate forecast: E4405 will exceed limit in 14 days

  • Safety Risk: High ΔP increases the risk of tube rupture.

Catalyst EOR risk: high-sulfur feed decreases remaining life by 10 Days

  • Current high-sulfur feed requires a 0.5°C temporary WABT increase to maintain spec.

Constraint alert: recycle gas compressor K7502A is maxed out

  • Compressor K7502A Load is at 100%. This status risks an off-spec product.

Unusual reactor conditions are detected over nightshift. Archimetis identifies possible causes and begins to triage and prioritize the actions required for operations. Engineers are in control—even before their morning meeting.

High WABT temperatures detected

At 17:45, the WABT was detected to exceed its allowed operating window.

Archimetis walks through catalyst behavior, feed quality, and spec performance, then forecasts remaining life and what’s driving degradation.

Why this matters

More data than ever. Same number of brains.

A massive increase in digitization has given teams more sensors, reports, and dashboards than they could ever process. But it didn't multiply judgement.

Archimetis turns data into action, showing the reasoning behind every recommendation so engineers stay in control.

AI + Human Expertise

Instead of asking humans to stare at more dashboards, we give them an AI partner.

See more and act faster

Archimetis reads live process data alongside history, incident notes, constraints, and documentation to understand what’s happening across the plant. It spots weak signals, emerging risks, and improvement opportunities before they escalate.

Four ways we improve how your plant runs

Smarter Process Safety

  • Predict risks before incidents happen.

Continuous Cost Optimization

  • Embed cost efficiency into daily operations.

Reliability Informed by Insight

  • Extend asset life and avoid unplanned downtime.

Economic Performance at Full Potential

  • Optimize the entire system for margin and throughput.

What this looks like in real refineries.

From safety studies to live risk prioritization

Archimetis starts from your existing safety studies and risk analyses, then checks each high-consequence scenario against live operating data.

What are our top 5 process safety risks right now?

  1. Reactor Temperature Runaway
    • Hazard: A failure in the reactor charge heater.
    • Consequence: Potential loss of containment.
  2. High-Pressure Flammable Release
    • Hazard: A release of liquid feed, product, or hydrogen.
    • Consequence: A pool or flash fire.
  3. Hydrogen-Rich Vapor Cloud Explosion
    • Hazard: A release of hydrogen-rich vapor.
    • Consequence: A VCE.
  4. Toxic Gas Release (H₂S)
    • Hazard: A loss of containment from equipment.
    • Consequence: Health risk from exposure.
  5. Corrosion-Driven Failures in Auxiliary Systems
    • Hazard: Releases due to corrosion mechanisms.
    • Consequence: Fire, explosion, or toxic release.

Assess risk number 1 with the actual plant data / performance

Reactor Temperatures & Setpoints

  1. Reactor Inlet Temperature
  2. Reactor Inlet Temperature Setpoint
  3. Reactor Outlet Temperature
  4. Weighted Average Bed Temperature (WABT)
  5. Reactor Outlet Temperature Limit: 390 °C

Here’s what the data shows:

  • Stable Control: Reactor temperatures are stable and move together.
  • Safety Margin is Narrowing: The gap between the actual Reactor Outlet Temperature and the 390 °C safety limit is concerning.

Investigate the next path:

  • Feed Composition Change
  • Controller Performance
  • Catalyst Deactivation

How we turn your data and expertise into decisions.

  1. Integrate your plant: Connect DCS/historian data into a single model.
  2. Learn from experience: Archimetis ingests plant documentation.
  3. Optimize Continuously: Archimetis monitors and recommends actions with full reasoning.

Built by experts. Backed by experience.

Archimetis is built by industry leaders who have spent decades working on the hardest AI and refining problems.