# Better decisions, from the first minute of every shift

Your team starts each shift knowing what matters most, why it's happening, and what to do next. All guided by AI that understands your plant.

## Start of shift

### When the data looks alarming
### When performance suddenly drops

Instead of scanning dozens of trends, the Archimetis flags the few things that matter, explains why they’re abnormal, and suggests what to check first.

### Key Alerts

- **Fouling rate forecast:** E4405 will exceed limit in 14 days  
  **Safety Risk:** High ΔP increases the risk of tube rupture.  
  **Field Operations:** The normalized fouling rate on E4405 (ΔP Exchanger) has accelerated.

- **Verify P7501A Health:** Increasing Motor Amps Trend  
  **Equipment:** Pump motor P7501A Amperage shows a non-linear upward trend (+3% over 7 days).

- **Constraint alert:** recycle gas compressor K7502A is maxed out  
  **Risk:** An off-spec product and blocks all margin optimization.

- **System Response:** A feed drops to zero. It's a sensor fault, saving hours of needless chasing.

### Alert Examples

- **The feed sulfur signal briefly dropped to zero**  
  **Safety Risk:** Low.  
  **Event:** At 7:45 AM, the feed sulfur signal dropped to zero.

Yield falls or defects spike. Archimetis formulates and ranks hypotheses, validates them against process data, and shows which causes are most likely.

## Why this matters

### More data than ever. Same number of brains.

A massive increase in digitization has given teams more sensors, reports, and dashboards than they could process. But it didn't multiply judgement.

**Archimetis turns data into action, showing the reasoning behind every recommendation.**

### AI + Human Expertise

Instead of asking humans to stare at more dashboards, we give them an AI partner.

### See more and act faster

Archimetis reads live process data alongside history and documentation to provide clear, ready-to-act recommendations.

### Steer decisions with human judgment

Engineers define the decision space, set constraints, validate assumptions, and inject real operating context into the analysis. Reasoning is fully traceable, making recommendations easy to inspect.

## Four ways we improve how your plant runs

### 1. Smarter Process Safety

Predict and prevent incidents by detecting weak signals before they escalate.

### 2. Continuous Cost Optimization

Embed cost efficiency into daily operations, guiding adjustments that lower OPEX and reduce waste.

### 3. Reliability Informed by Insight

Extend asset life and avoid unplanned downtime with proactive maintenance.

### 4. Economic Performance at Full Potential

Optimize the entire system to identify where constraints deliver the most value.

## From safety studies to live risk prioritization.

Archimetis uses existing safety studies, checks high-consequence scenarios against live data, and highlights which risks are theoretical or actively challenged.

### What are our top 5 process safety risks?

1. **Reactor Temperature Runaway**: Potential catastrophic loss of containment.
2. **High-Pressure Flammable Release**: Risk of fire or explosion.
3. **Hydrogen-Rich Vapor Cloud Explosion (VCE)**: Severe risk of fatalities.
4. **Toxic Gas Release (H₂S)**: Significant health hazard to personnel.
5. **Corrosion-Driven Failures in Auxiliary Systems**: Potential for fire, explosion, or toxic release.

### The next logical step

Assess the health of the safety barriers designed to prevent these events.

**Reactor Temperatures & Setpoints**

**Observations:**  
- **Stable Control:** Reactor temperatures are stable.  
- **Narrowing Safety Margin:** Close to operational safety limits, prompting investigation into underlying reasons.

**Hypotheses to Explore:**  
- Feed Composition Change  
- Controller Performance  
- Catalyst Deactivation

## Conclusion

Archimetis combines data and human expertise to not only identify risks but to also offer actionable insights, allowing for optimized operations and enhanced safety.